Best Laptops for Exocad DentalCAD 3.0 Galway

gadgeteerNovember 20, 2022

0 2,213 5 minutes read

Dental laboratories need specific software or program that would help and aid them with their work. One software that they could use is the Exocad DentalCAD 3.0. This software has continuously been evolving to ensure that technology could adapt to the evolving needs of the dental industry particularly the dental laboratory part.

Exocad DentalCAD has been given 13 international patents which makes this tool one of the best and one of the indispensable tools which help technicians work faster, efficient, more accurate and provide great results.

In this article, we shall provide you useful information which could help and guide you. Moreover, we shall also provide you a list of best laptops that could help you choose one that would best suit your needs and preference.

Requirements for Exocad DentalCAD 3.0 Laptop

Processor

Laptops that have a fast processor with multiple cores would definitely help you be able to access and use Exocad DentalCAD 3.0 on your laptop without any problems and issues.

Requirements

For you to be able to determine which processor would best suit Exocad DentalCAD 3.0, you would need to know how the mentioned software works.

Most often, this software is used to aid in creating and modifying orthodontic cases, cutting models and even to generate treatment plans. Hence, with such huge and important purpose in using this software, you would need a very high if not the highest-performing processors which could offer you at least four cores with the clock speed of 2.8 GHz or higher plus a good single core performance like Intel Core i5-11400H or above.

Recommendations:

We recommend for you to have at least Intel Core i5-10500H. This would be sufficient enough for you to be able to use Exocad DentalCAD 3.0 which is perfect for those who are on a tight budget or who cannot afford much of the expensive options. However, if you would want to have a more powerful laptop, them we recommend that you get Intel Core i5-11400H as your minimum option. There are others which are more powerful than this one. However, if you one a more affordable in terms of price, then, we suggest for you to get something like the Ryzen 7 2700U processor. That is if you are willing to sacrifice a single-core performance.

Graphics Card

Minimum Requirement Under $1000

If you are trying to get a laptop under $1000 just for Exocad DentalCAD 3.0 Galway, then, you could get a cheaper notebook. You could make this happen by getting an integrated Intel/AMD graphics or entry level dedicated GPU like GTX1650. Keep in mind, that these mentioned graphics cards are not recommended but it could be an option.

Recommended Consumer Graphics ($1000 to $2000)

If your budget does not allow you to go over $2000, then, it is best that you go for a consumer-grade card. These are just a few recommendations which you could look into:

RTX 3060
RTX 3070

Memory

Minimum (8GB)

Unfortunately a good computer with 8 GB RAM is difficult to find as they are either old versions or the specifications of it would not be up to date which means it would not be able to keep up with the demand or requirement of your needs. Though that is the case, if you are really on a tight budget and you would not need a much up-to-date laptop, then, the 8GB memory is enough for you to be able to use Exocad DentalCAD 3.0 Galway. Keep in mind as well that check this factor carefully as though this application could run on 4 GB RAM, it is not recommended and it is highly discouraged.

Recommended (16GB)

If you could go higher on your budget, then, we suggest that you go for the 16GB RAM. This would more or less cost you around $650. Though this might seem affordable and cheap for some, keep in mind, that you will have to check other factors and components as well. Check and focus on the CPU, SSD and the like.

Best (32 GB)

If you wish to have a better experience and have no problems nor issues, then, it is suggested that you get the 32 GB or more for the RAM. These laptops could cost you about $1700 to $3500.

Optional Requirements for Exocad DentalCAD 3.0 Galway

Storage

SSD vs HHD

Though SSDs have been used by many and has been the new trend for almost a decade, there are still some that are using the old version – HDD. These days, a lot often use huge files, do heavy multitasking and activities that use a lot of storage. Hence, it is a necessity and a need for you to use a more reliable and faster storage which means, it is better if you use SSD than an HDD. In fact, the only option you have if you are going to use Exocad DentalCAD 3.0 Galway is SSD and we suggest that you get at least 256 GB size.

How much storage do you need?

One of the most important things you would need when you are planning to use Exocad DentalCAD 3.0 Galway is a huge storage space. The reason behind this is because you would need enough storage space for you to be able to install files of Exocad DentalCAD 3.0 Galway. Hence, as mentioned earlier, we suggest that you get a laptop that has at least 256 GB storage space. This way, you would not have to worry about storage space. Laptops with this storage space could cost you about $500 to $1870.