Cleaning your house has never been easy until Roomba has been developed. Roomba is a smart vacuum cleaner which all you have to do is just set a cleaning schedule and ensure that its home base is plugged and your Roomba is ready to roll.
Having a Roomba as a cleaning partner is very convenient. However, just like any other technology, sometimes it encounters errors. One of the errors of Roomba that you might experience is the Error 14.
If you encounter the error 14, do not worry nor panic as through this article, we shall provide you a guide and useful information about Roomba’s error 14. We would also provide you methods of how to solve the mentioned error.
When you encounter Roomba Error 14, for sure you would wonder what it means. Through this article, we shall look into this.
Roomba Error 14 means that your Roomba is not able to detect an installed bin. This could happen due to the sensors, bin and filters getting too dirty. Another reason as to why you are getting error 14 is due to the software of Roomba being corrupted. Moreover, it could also be that the dustbin is not properly and firmly placed or it could have damages. Lastly, error 14 could also mean that your Roomba’s battery is low.
When dealing with any type of technology, you will have to ensure that you do not neglect them. You must ensure that you maintain and take very good care of them. The Roomba is not an exception to this.
Roomba does all of the dirty work for you by getting around and getting rid of all the dust and dirt of your home. It could even reach those hard to reach areas of your home. This means, you will also have to clean and maintain it for you to be able to get the maximum benefits of having a Roomba.
When it comes to error 14, the full bin sensors have a huge and important role. As mentioned earlier, the full bin sensors are responsible for sensing the installed bin. This means that when it gets too dirty or the bin cannot be detected, it will not function well.
Another important part is the filter. The filter has the ability to sift the dust collected into smaller particles which would then go into the bin. There is also a possibility where dust, wool and bigger objects could also accumulate there which then could end up on other parts of the device.
Since the bin is the part which catches everything that passes through the filter, we could say that this part is the dirtiest part.
You should clean the floor tracking sensors and cliff sensors once a month. While the bin sensors should be cleaned every 2 weeks.
If you are using your Roomba everyday, you will have to clean the filter once a week. If you have furry pets, it is better to clean your filter twice a week and replace it every two months.
Ensure that you empty the bin after cleaning. Ensure that you wipe it too.
Another possibility as to why you are experiencing error 14 is due to software bugs which could lead to your Roomba to malfunction. This could mean that you might have to de-load and have your Roomba take a break and start all over again.
Keep in mind that if your software starts to lag, the other parts will be affected too and will not do their own jobs.
To resolve this, you will have to do the following:
This would depend on the model that you have.
When you do a factory reset, it will delete all custom settings, maps and schedules. Before doing this, ensure that you have taken note of all your data. Also, make sure that your Roomba is connected to your iRobot Home app.
If this does not work, do the following:
Check your dustbin if it has cracks, scratches and dents. Or if it has a significant damage like the shape has changed or there are broken pieces. If this is the case, you will then have to get a new one. Ensure that you follow the steps in removing the dustbin. Also, keep in mind that you buy a dustbin from a trusted store.
Scratches which are surface level should not affect the performance of your Roomba.
Sometimes, we tend to forget our smart Roomba until it stops working. This could mean that the battery is weak which could be a cause of it crashing.
Once you have seen the red light flashing on your Roomba, it is time to charge it as this only means one thing and that is that the battery is running out and is about to be drained.
Take note that your Roomba’s home base should always be plugged in.
Two Ways to Charge Your Roomba
The home base is usually where your Roomba goes to after cleaning or when its battery is slow.
You could also charge your Roomba by plugging into a wall socket.
Do not wait for days before you recharge your Roomba. This could damage the battery of your Roomba. If you see a amber red pulse light, this means your Roomba already needs charging. If the light is solid green, this means it is full.
You would need a 16 hour refresh charge when your Roomba has been away from the Home Base for a very long time. Roomba will start itself when the battery is refreshed.
The lifespan of Roomba’s battery is about 2 to 6 years but of course this would depend on how much TLC you give it. It is time to consider to get a new battery when:
Ensure that you purchase batteries from a trusted manufacturer.
Once the flashing red light appears, then, it is time to charge it.
No, unfortunately, the Roomba is not waterproof. It could only clean dust, dirt and other solid materials.
Press the clean button and you are good to go. However, if you want to use scheduled cleaning time option, you will need WiFi.
Yes, it has a one year warranty.
Watching sport does not feel as self contained as it once did. It used to…
You're in the same meeting as your coworker. The deadline just got moved up by…
Imagine working alone on a late shift, driving between job sites, or checking a property…
Algo fundamental cambió en el mundo de la creación de contenidos hace unos años. Durante...
Desde que se abrió el primer casino en el siglo XVII, este sector ha...
Si has pasado unas cuantas horas en Princess & Conquest, es probable que te hayas topado con...